>Customer Support
Inc. VAT Ex. VAT
Toggle Nav
Search
Advanced Search

01142 310 911
Open: Mon - Fri: 9am - 5pm

CONTACT

Favourites
  1. Remove This Item
Clear All
Compare
You have no items to compare.

1

Trade
Cart 0
Menu
Toggle Nav
Account

Romex - Rompox D1 - Pavement Fixing Mortar Slurry

Quick Find Code: 050089
main product photo

Romex - Rompox D1 - Pavement Fixing Mortar Slurry

Quick Find Code: 050089
Grouped product items
Product Name Price inc VAT
Neutral - 25Kg
£95 .40  per item
inc VAT
Stone Grey - 15Kg
£96 .00  per item
inc VAT
Basalt - 25Kg
£101 .40  per item
inc VAT
delivery included
Add to Wish List Add to Compare

ROMEX Netural, the lightest buff/creamy coloured pavement fixing mortar is tailored to meet the most varied requirements and form the basis of strong, clean paved stone joints. The quick and easy-to-use products have many advantages, especially for use within city areas. With ROMPOX D1, the proven 2 component epoxy resin pavement fixing mortar for medium traffic loads, it is no longer a problem to joint slabs cleanly and permanently, without having to overstretch your budget. ROMEX pavement fixing mortars are proven to be long-lasting throughout whole stretches of road. The slabs in pedestrian zones can be joined just as well as jointing on heavily trafficked roads. Regardless of where the slabs you want to join are situated, you can always be sure to achieve a clean result with no cement residue. You no longer have to worry about frost damage or washing out of joints, as all products are frost, de-icing salt and street-sweeper resistant. In addition, weeds are no longer able to take hold, thus ensuring a permanently visually attractive jointed surface. If you value a good visual result, easy application and environmentally friendly construction methods, then use ROMEX pavement fixing mortars for the jointing of your slabs.

More Information
Quick Find Code 050089
Manufacturer Romex
Container Coverage 1 tub covers 10 - 15sqm on a 15.3sqm patio pack of paving slabs, please see spec for indepth measurements
Container Size 25kg
Size NA
Usage Instructions

Construction Site Requirements: The foundation needs to be prepared according to the expected traffic loads. Future loads must not cause the surface to settle or loosen stones.

Preparation: Clean out joints to a depth of at least 30mm (minimum joint width of 3mm). The surface to be joint-fixed should be cleaned of all impurities before work commences. Adjoining surfaces that are not to be joint-fixed are taped off.

Pre-wet: Pre-wet the surface. Porous surfaces as well as higher surface temperatures, require more intense pre-wetting.

Mix: Pour the 25kg filler components into the mixing tub and start the mixing process. Whilst mixing, slowly add the separately packaged components completely into the mixture. After mixing for 3 minutes add water according to the product package and continue mixing well for at least 3 minutes.

Application: Apply the mixed pavement fixing mortar onto the well-moistened surface and work it carefully into the joints using a squeegee/rubber slider. The mortar is poured out at three or four spots within the jointing area in order to make the best use of the fluidity of the pavement-fixing mortar. Application time at +20°C is approx. 20 – 30 minutes.

Final cleaning: After approx. 10 – 15 minutes the excess mortar on the surface of the stones can be swept off carefully with a large, coarse broom. Then use a soft, hair broom to do a final cleaning until all residual mortar has been removed from the surface. The correct moment for sweeping is when white smears no longer form on the stone surface during sweeping. Sweeping should be done diagonally to the joint. Do not re-use swept-off material.

Subsequent treatment: The freshly jointed surface needs to be protected against rain for the next 12 – 24 hours. The rain protection layer must not be laid directly onto the paved surface this is to ensure sufficient air circulation. During the initial period, a very thin film of epoxy resin remains on the stone surface and intensifies the colour of the stone and protects it from dirt. This film disappears over the course of time due to weathering and abrasion.

Consumption table in kg/m² - Basis for calculation: joint depth 30 mm      
Stone Size 40 x 40cm 20 x 20cm 16 x 24cm 14 x 16cm 9 x 11cm 4 x 6cm
3 mm 0,7 1,4 1,4 1,7 2,6 4,9
5 mm 1,1 2,3 2,4 2,9 4,4 8,1
8 mm 1,8 3,6  3,8  4,6  7,0  13,0 
Polygonal Slabs  approx. 4 - 6     
Trustpilot

   Frequently Asked Questions and Answers

FURTHER PRODUCTS IN THIS CATEGORY