PLEASE NOTE: Romex have since changed the packaging and no longer supply the Rompox D1 in the bucket container these now come in a box with the aggregate and solution separate. The aggregate comes in a bag with the solution in small bottles.
ROMEX Netural, the lightest buff/creamy coloured pavement fixing mortar is tailored to meet the most varied requirements and form the basis of strong, clean paved stone joints. The quick and easy to use products have many advantages, especially for use within city areas. With ROMPOX D1, the proven 2 component epoxy resin pavement fixing mortar for medium traffic loads, it is no longer a problem to joint slabs cleanly and permanently, without having to overstretch your budget. ROMEX pavement fixing mortars are proven to be long lasting throughout whole stretches of road. The slabs in pedestrian zones can be jointed just as well as jointing on heavily trafficked roads. Regardless of where the slabs you want to joint are situated, you can always be sure to achieve a clean result with no cement residue. You no longer have to worry about frost damage or washing out of joints, as all products are frost, de-icing salt and street-sweeper resistant. In addition, weeds are no longer able to take hold, thus ensuring a permanently visually attractive jointed surface. If you value a good visual result, easy application and environmentally friendly construction methods, then use ROMEX pavement fixing mortars for the jointing of your slabs.
Quick Find Code
Manufacturer for Build
1 tub covers 10 - 15sqm on a 15.3sqm patio pack of paving slabs, please see spec for indepth measurements
Construction Site Requirements: The foundation needs to be prepared according to the expected traffic loads. Future loads must not cause the surface to settle or loosen stones.
Preparation: Clean out joints to a depth of at least 30mm (minimum joint width 3mm). The surface to be joint-fixed should be cleaned of all impurities before work commences. Adjoining surfaces that are not to be joint-fixed are taped off.
Pre-wet: Pre-wet the surface. Porous surfaces as well as higher surface temperatures, requiremore intense pre-wetting.
Mix: Pour the 25kg filler components into the mixing tub and start the mixing process. Whilst mixing, slowly add the separately packaged components completely into the mixture. After mixing for 3 minutes add water according to the product package and continue mixing well for at least 3minutes.
Application: Apply the mixed pavement fixing mortar onto the well moistened surface and work it carefully into the joints using a squeegee/rubber slider. The mortar is poured out at three or fourspots within the jointing area in order to make best use of the fluidity of the pavement fixing mortar. Application time at +20°C is approx. 20 – 30 minutes.
Final cleaning: After approx. 10 – 15 minutes the excess mortar on the surface of the stones can be swept off carefully with a large, coarse broom. Then use a soft, hair broom to do a final cleaning until all residual mortar has been removed from the surface. The correct moment for sweeping, is when white smears no longer form on the stone surface during sweeping. Sweeping should be done diagonally to the joint. Do not re-use swept off material.
Subsequent treatment: The freshly jointed surface needs to be protected against rain for the next 12 – 24 hours. The rain protection layer must not be laid directly onto the paved surface thisis to ensure sufficient air circulation. During the initial period a very thin film of epoxy resin remains on the stone surface and intensifies the colour of the stone and protects it from dirt. This film disappearsover the course of time due to weathering and abrasion.
Consumption table in kg/m² - Basis for calculation: joint depth 30 mm
40 x 40cm
20 x 20cm
16 x 24cm
14 x 16cm
9 x 11cm
4 x 6cm
approx. 4 - 6
Country of Manufacture
Our standard method of delivery for heavy items is using the pallet delivery network. The delivery will arrive on a lorry with an electric tailift and a hand pump truck.
Access must be made for a lorry (up to 32ft) otherwise additional delivery charges may be payable. You must advise us of any restrictions that will impede the delivery vehicles from delivering the Products. The Products will be delivered to the kerbside outside. Our couriers are not insured to take goods onto your premises without permission. If you require the driver to come onto your property (at their discretion and deemed safe) with the wagon, the Products, or both, this is entirely at your own risk and if the driver or wagon damages anything (including but not limited to, manhole covers, tarmac driveways, block paved drives, flagged driveways / graveled or stoned driveways, grassed areas, walls, pillars, gate posts, gates, trees, hedges, telephone wires, lights) the cost of repair will be your responsibility.
Ensure that the delivery area is flat and solid enough to take the weight of a pallet truck carrying up to 1000kg in weight. Please note Gravel and Grass are not classed as solid and flat. If the delivery area is not flat the driver will require help in getting the pallets off the vehicle. If help cannot be given there will be a redelivery charge to deliver at a time when help can be given. If you live on a hill you will need to call us before you order to find out if our delivery company can deliver to your address. This is for health and safety reasons, usually the easiest method of getting around this is for the order to be delivered to the nearest flat ground. It will be your responsibility to move the goods to your property. Deliveries via hiab or moffet can be arranged but at an additional cost, click for further details.
Smaller items will be delivered via a parcel courier.
All delivery methods will require someone to accept the delivery, check it over and sign that they have been received in good condition. Please note any damages on the delivery sheet / electronic device, do not use the product and contact us straight away.
Next day, AM/PM or even Saturday deliveries can be arranged at an extra cost. Please add your items to the shopping cart for an instant quote.
After your order has been dispatched you will be contacted on the phone (within 2 days), by your local pallet delivery company in your area, once they receive the goods from our local depot, to book-in a day that is convenient for you. (this will not occur on Timed, Next Day & Saturday deliveries)
After your order has been dispatched you will receive your goods within 2-3 days. No telephone book-in will occur.
Remember when handling your goods:
Take care when removing the packaging / banding and also when removing the product out of the crate / pallet as they may have weakened during transit and could be unstable.
The product is quite heavy, and some larger products can weigh a lot. Consider this when arranging the delivery, as you may need appropriate lifting equipment, or an extra pair of hands.
To ensure you prepare adequately for pallet deliveries please watch the video below for a comprehensive guide and also read the full delivery guide https://lsd.co.uk/delivery-details