Jointex - Ceramic Extra Fine - Pointing Mortar

Quick Find Code: 050091
main product photo

Jointex - Ceramic Extra Fine - Pointing Mortar

Quick Find Code: 050091
Grouped product items
Product Name Price inc VAT Qty
Neutral - 15Kg
£60 .00  per item
inc VAT
Bulk Discount
Stone Grey - 15Kg
£61 .20  per item
inc VAT
Bulk Discount
delivery included

Jointex has developed the "Ceramic Extra Fine" jointing compound for use with ceramic paving slabs and products. The one component, air hardening, pavement fixing mortar is ready mixed for immediate use. It is permanently water permeable, resistant to high-pressure cleaners and prevents weeds from sprouting. This compound has been specifically designed for smaller joints of 2mm or more. Can be used when pointing the following outdoor paving products porcelain, natural, and concrete slabs. The neutral sand colour tends to happen used in lighter colouring paving joints but has been known to be used on black coloured paving to create a real statement.

Something to make note of when using Jointex or Rompox on a dark patio especially on a hot day we advise on using a lot more water initially. This is needed to cool the surface so it doesn't dry out too quickly as this can end up staining the slabs. The slabs we have found this to happen on is the dark slate paving and the dark granite slabs.

More Information
Quick Find Code 050091
Manufacturer Jointex
Container Coverage 1 tub covers 10 - 15sqm on a 15.3sqm patio pack of paving slabs, please see spec for indepth measurements
Container Size 15kg
Size NA
Usage Instructions

Minimum joint width is now 2mm.

JOINTEX EASY JOINT can be used in two different ways:

a) First way (the traditional way )

1. Watering the surface

2. Open the bucket and empty the plastic back onto the surface that is to be pointed.

3. Using a hard broom or rubber broom, work the material in a deep, firm and compact into the joints.

4. Brush away any remaining mortar residue with a soft broom diagonally to the surface.FINISHED!!!!No further equipment or extras are necessary.

 

b) Second way ……NEW ……NEW ……NEW

1. Watering the surface

2. To achieve a better self-compacting result without a visible shiny surface, the area can be pre-wet with water.

3. Open the bucket and pour JOINTEX® EASY Joint / CET onto the surface that is to be pointed.

4. Using a hard broom or rubber broom, work the material in a deep, firm and compact into the joints.

5. After approx. 10 minutes flush the material into the joints with a spray-like jet of water.< So you achieve a better self-compacting result > Sagged joints should be refilled.

6. Brush away any remaining mortar residue with a soft broom diagonally to the surface.FINISHED !!!!

This technique should only be applied to surfaces with highly water-permeable subsoil.

 

Curing Time

The first technique ( traditional technique)

The surface can be walked on after approximately 6 to 8 hours and is fully load-bearing after Approximately 3 days(Calculation: ca. +20° C and ca. 65% humidity )

Second technique new…..new….new…new

The surface needs a much longer hardening time. Approximately 48 hours (Calculation: ca. +20° C and ca. 65% humidity) High temperatures increase, low temperatures decrease hardening times. Clean used working tools with water or with the usual cleaner.

Not in the hands of children!!

   Frequently Asked Questions and Answers


FURTHER PRODUCTS IN THIS CATEGORY