>Customer Support
Inc. VAT Ex. VAT
Toggle Nav
Search
Advanced Search

01142 310 911
Open: Mon - Fri: 9am - 5pm

CONTACT

Favourites
  1. Remove This Item
Clear All
Compare
You have no items to compare.

1

Trade
Cart 0
Menu
Toggle Nav
Account

Instarmac - Ultra Scape - Flowpoint Fine

Quick Find Code: 050085
main product photo

Instarmac - Ultra Scape - Flowpoint Fine

Quick Find Code: 050085
Grouped product items
Product Name Price inc VAT Qty
Natural Grey - 20kg
£30 .00  per item
inc VAT
Charcoal - 20kg
£30 .00  per item
inc VAT
delivery included
Add to Wish List Add to Compare

Ultra Scape Flowpoint Fine is a quick-drying, easy-flow, outdoor grout for early trafficking that conforms to BS 7533. It is perfect for all paving applications where a rigid or bound void-free joint is required. Can be used on driveways, patios, town centre pedestrian schemes, pathways and carriageways.

Types of paving Flowpoint fine can be used with, are natural stone, concrete flags, porcelain tiles and clay pavers. Simply put it's a rapid set, easy flowable outdoor grout that is NOT permeable. A great choice for porcelain paving slabs. With the added benefit that a little goes a long way.

 

  • Joint widths: 2-50mm
  • Open to foot traffic: 1 hour
  • Open to vehicular traffic: 4 hours
  • Just add water
  • Set time: 15 minutes at 20°c
  • BS 7533 compliant
  • For use with all types of paving elements
  • Available in charcoal and natural grey
  • 20kg buckets

More Information
Quick Find Code 050085
Manufacturer Instarmac
Container Coverage 1 tub covers approx. 35m2 for slabs measuring 900x600mm, with a joint width of 5mm and depth of 20mm. please see spec for in-depth measurements
Container Size 20kg
Size NA
Usage Instructions

MIXING AND APPLICATION

Once the paving is ready to receive the grout the following method must be adhered to: Immediately prior to jointing it must be ensured that the joints are free from debris and all ponded water removed. The paving surface and joints must be pre-soaked and kept wet until the jointing process has been completed. A 20kg bucket requires 3.4 litres of water and must be mixed for between 3 and 5 minutes until a smooth lump-free consistency has been achieved. Apply the mortar without delay. Do not store liquid mortar other than in transit from the mixer. It must be carefully forced into the joints using a suitable rubber squeegee. The mortar should be constantly moved over the surface to repeatedly top up joints in which the mortar may have slumped following initial placement. Use the rubber squeegee to remove as much mortar as possible from the surface. The surface must be kept constantly moist using a soft spray of water. When the jointing mortar has hardened sufficiently or achieved its initial set the paving surface must be cleaned using a brush and copious amounts of water. Cleaning must be carried out thoroughly and no mortar must be allowed to remain on the surface of the paving.

WORKABILITY

Approximately 5-15 minutes depending on temperature.

PRECAUTIONS

Please note: a small trial should be done to ensure compatibility with the stone being used as lnstarmac cannot test all stone types. Wash all tools frequently. Mix only enough material to apply in 4 minutes. Never remix or add extra water. 

Wear protective clothing. Avoid skin and eye contact - wet cement can burn the skin. Cool temperatures retard, warm temperatures
accelerate. Care should be taken when using the product near drainage. You will need to make sure you have a run-off to take the
excess away as it cannot go down a drain.
Trustpilot

   Frequently Asked Questions and Answers

FURTHER PRODUCTS IN THIS CATEGORY