EASY Care - Mortar Stain and Calcium Remover - 1 Litre

Quick Find Code: 047894

EASY Care - Mortar Stain and Calcium Remover - 1 Litre

Quick Find Code: 047894
£25 .80  per item
inc VAT
delivery not included

EASY Mortar Stain and Calcium Remover as the name suggests is the easiest way to deal with cement residue deposits, scale, oxidisation & atmospheric contamination.

This ecological cleaner is not only powerful but fast-acting. However, unlike the usual acidic or alkaline-based cleaners, it does not require the extra step of neutralising after application.

1 bottle will clean up to 60 sqm.

Choosing the right product for the right type of efflorescence.

  • If the deposit is fluffy in nature and can be brushed or washed off then it is likely to be sodium based. The correct product for this is EASY Efflorescence Remover+
  • If the deposit on the surface is hard and doesn’t dissolve with water or will not easily brush off, then it is likely to be calcium-based. For this problem use EASY Mortar Stain & Calcium Remover. This removes the white deposits but cannot prevent the possibility of re-occurrence.
More Information
Quick Find Code 047894
Manufacturer Azpects
Container Coverage Depends on contamination
Container Size 1l
Size 1 Litre
Usage Instructions

PRECAUTIONS

ALWAYS TEST A SMALL HIDDEN AREA BEFORE USE

Not suitable for use on limestone, marble, granite or calcium (lime) based stone.
Remove loose dirt, moss & other debris from the surface prior to treating.
Keep children & pets/animals away until cleaning process is complete and surface is dry.
Do not allow to come into contact with plants, shrubs or grass.
Ideal operation operating temperature between 10 degrees Celsius & 20 degrees Celsius. As a guide ensure the surface is cool to touch.
Do not apply during frost or when temperature is below 5 degrees Celsius. When used in colder temperatures effectiveness may be reduced & longer cleaning time may be required.
Do not apply in direct sunlight.
Clean tools and other equipment with warm water immediately after use.

APPLICATION: SHAKE WELL BEFORE USE

Applying using a spray, watering can or brush to a damp surface.
FOR LIGHT CONTAMINATION: Dilute 1 dose (100ml) in 1 litre of water.
FOR HEAVY CONTAMINATION: Dilute 3 doses (300ml) in 1 litre of water.
Ensure heavy contamination is saturated.
Agitate well with a stiff brush and leave to act for at least 10 minutes.
DO NOT LET THE SURFACE DRY OUT ONCE APPLIED.
Reapply and leave for a further 5 minutes.
Agitate with a stiff brush.
Rinse well with clean water or use a power washer.
A second application may be required for particularly heavy deposits

STORAGE

Store between 5 degrees Celsius and 25 degrees Celsius.

Keep out of direct sunlight and protect from frost.

   Frequently Asked Questions and Answers


FURTHER PRODUCTS IN THIS CATEGORY