EASY Care - Efflorescence Remover Plus - 1 Litre

Quick Find Code: 047893

EASY Care - Efflorescence Remover Plus - 1 Litre

Quick Find Code: 047893
£25 .80  per item
inc VAT
delivery not included

EASY Efflorescence Remover+ is a non-acid chemical with the main focus of neutralising the salts on and within all types of materials. This reduces the possibility of more white deposits returning in the future.

What is efflorescence? The term is generally applied to any white deposit that appears on paving, brickwork and cement. However, the white deposits can be one of many salt types and different products are required to treat them.

Choosing the right product for the right type of efflorescence.

  • If the deposit is fluffy in nature and can be brushed or washed off then it is likely to be sodium based. The correct product for this is EASY Efflorescence Remover+
  • If the deposit on the surface is hard and doesn’t dissolve with water or will not easily brush off, then it is likely to be calcium-based. For this problem use EASY Mortar Stain & Calcium Remover. This removes the white deposits but cannot prevent the possibility of re-occurrence.
More Information
Quick Find Code 047893
Manufacturer Azpects
Container Coverage Depends on contamination
Container Size 1l
Size 1 Litre
Usage Instructions

PRECAUTIONS


ALWAYS TEST A SMALL HIDDEN AREA BEFORE USE

Remove loose dirt, moss & other debris from the surface prior to treating.
Keep children pets/animals away until cleaning process is complete and surface is dry.
Do not allow to come into contact with plants, shrubs or grass.
Ideal operation temperature between 10 degrees Celsius and 20 degrees Celsius. As a guide ensure the surface is cool to touch.
Do not apply during frost or when temperature is below 5 degrees Celsius.
When used in cooler temperatures, effectiveness may be reduced & longer cleaning time may be required.

Do not apply in direct sunlight.
Clean tools and other equipment with warm soapy water after use.


APPLICATION


SHAKE WELL BEFORE USE

Apply a saturated coat to affected area only using a garden spray watering can or brush.
Dilute 1 dose (100ml) in 1 litre of water.
For heavy contamination add 2 doses (200ml) to 1 litre of water.
Leave for at least 1 hour to act then re-apply.
Leave for 24 hours to allow deep penetration and neutralisation of the salts
After 24 hours wash the surface with a power washer or hose and a stiff brush.


STORAGE
Store between 5 degrees Celsius and 25 degrees Celsius.

Keep out of direct sunlight and protect from frost.

   Frequently Asked Questions and Answers


FURTHER PRODUCTS IN THIS CATEGORY